Djupbrunnspump Grundfos SP215-1, 18,5kW 215m³/h, 23m 3x400V 50Hz

Deep well pump Grundfos SP215-1, 18.5kW 215m³/h, 23m 3x400V 50Hz

Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally.
All steel components are made of stainless steel, EN 1.4301 (AISI 304), which ensures good corrosion resistance.
This pump is approved for drinking water.
Pump is equipped with an 18.5 kW MS6000 motor with sand protection, mechanical shaft seal, water lubricated shaft bearings and a volume compensating diaphragm.
The motor is a closed-type submersible motor with good mechanical stability and high efficiency.
Suitable for temperatures up to 40°C.
The motor is equipped with a Grundfos Tempcon temperature sensor which, through communication via the power cable together with a control panel MP204, enables monitoring of the temperature.
The motor is intended for direct start (DOL).

Additional product

information The pump is suitable for applications similar to the following:

*-The image of the product may differ from the actual product.

Technical data
Speed	2900 rpm
Resulting flow	215 ^m³ /h
Resulting lift height for the pump	23 m
Reduce. impeller	No
Shaft seal for engine	CER/CARNBR
Read on the nameplate	CE, GOST2
Curve tolerance	ISO9906:2012 3B
Pump type	SP 215
Step	1
Model	C
Valve	Yes
Engine version	T40

Others
Minimum efficiency index ,MEI ≥	-
Net weight	100 kg
Gross weight	126 kg
Delivery volume	0.2 m³

Performance curves

» Drawing with measurement description